Archived ISE issues

[jhissem]

after running the simulation, i found that one of my outputs was missing.  any ideas on what is causing this or how to fix it?

[duthv]

Hi,

In order for anyone to help you should provide more data. Such as is the output missing from the waveform top level? That means you need to manually add it?

Or is it that the output is shown on the waveform, although none of the transitions are appearing? What is the exact issue you are seeing?

Also please clarify the simulator. I am guessing you are referring to the simulator build into ISE correct?

Thanks

Duth

[jhissem]

the test bench waveform shows 5 outputs, which is correct.  When I run the built in simulator, the results only show 4.

[duthv]

Which version of SW is this? Do you see the output in the objects window? Is it just that in initial run it is missing can you add it in manually?

-Duth

[xeeesh]

salam...

   I m facing exactly same problm ... plzzzzzz  do help if u got d idea?????

[rourabpaul]

1st of all go to 'project' option and click 'clean up all genarated file file' and try it again. If you u facing same problem, then creat an new project for your code. I think its a bug of ISE.