DSP Tools

[robhem]

Hi,

Please could someone explain to me how to assign a Gateway In/Out to a device pin?

I have a Digilent Nexys2 dev board and wish to make a design in System Generator. I hope to generate a bit file to run directly on the board.

For example, I have a push button input on pin B18 which is normally pulled low and will go high on pressing the button. To work with this input, can I use a Gateway In and assign it to pin B18?

Regards,

Rob

[robhem · Accepted solution]

OK, I see now how to do this as in my attached file.