03-31-2012 11:38 AM
I have a problem with generating a system from Xilinx blocks in Simulink. When I click "Generate" button, I have an error message:
Checking model status
Checking simulation times
Performing compilation and generation
*** ERROR ***
Errors occurred during netlist generation.
Error using ==> xlProcBlockElaborateBMM at 19
synopsis file 'D:\Xilinx\12.2\ISE_DS\ISE\netlist\synopsis' not found
I tried different circuits, but the result is the same. As you see, Xilinx installation path is D:\Xilinx\, and Matlab installation path is D:\MATLAB\R2010a. Can you help me with this problem?
04-09-2012 01:58 AM - edited 04-09-2012 02:03 AM
Have you tried setting environmental variables as told in this link?
05-12-2012 12:12 PM
i also get the same error i.e xlProcBlockElaborateBMM at 19 saying that the synopsis file cannot be created . I am using Matlab2010b and xilinx ISE 12.2.can any one help me to solve this.
05-19-2012 03:48 AM - edited 05-19-2012 03:52 AM
Is this error machine dependent ?
Can you pleae try on your colleague's machines with same/differnt configuration?
Did you try clearing the cache and then regenate ?
This error persists even if you shutdown matlab and then reopen ?
Is your machine 32bit/64 bit ?
can you run xlDiagnosticInfo.m in the Matlab command prompt and upload the log file?
I also suspect if Matalb R201b is not compatible with 12.2
06-15-2012 03:23 AM
pls check the following link for compatibility.....
http://www.xilinx.com/support/answers/17966.htm pls try to maintain it...
06-26-2012 05:51 AM
Also, ensure you are opening Sysgen from the start menu and not through Matlab.