01-13-2011 02:39 AM
hi to all
i have wrote a flip flop code in xilinx ise. i hav tried to see the out put through chipscopepro in 10.1 but unable to see the out put waveforms. i'm unable to match the specifications in the trigger setup windows.
please help me
01-13-2011 03:07 AM
I would recommend using the ChipScope inserter flow to ensure correct connection of the cores. Once you have this done use the Tirgger immediate feature in the Analyzer to ensure that data can be captured. From there you can begin to tweak your trigger condition to capture the correct data. Here is a tutorial that may help targetting 12.4 -