Hi All,
I am trying to do the USB example for the ML507, from the Xilinx example "ml507_bsb_std_ip_usb_ppc440.zip".
I have done all the steps in the document "ml507_std_ip_ppc440_usb_addition.pdf ".
I keep getting the following error, and I can't see what the problem is.
"xps_epc_0_PRH_CS_n_pin" is defined in
- data/ml507_bsb_system.ucf
- hdl/ml507_bsb_system.vhd
- hdl/ml507_bsb_system_stub.vhd
- implementation/ml507_bsb_system.ucf
Thanks in advance,
Matt
----error below
IOSTANDARD = LVCMOS33;> [ml507_bsb_system.ucf(783)]: NET
"xps_epc_0_PRH_CS_n_pin" not found. Please verify that:
1. The specified design element actually exists in the original design.
2. The specified object is spelled correctly in the constraint source file.
[ml507_bsb_system.ucf(1130)]: NET "xps_iic_0_Gpo_pin" not found. Please
verify that:
1. The specified design element actually exists in the original design.
2. The specified object is spelled correctly in the constraint source file.
IOSTANDARD=LVCMOS33;> [ml507_bsb_system.ucf(1131)]: NET "xps_iic_0_Gpo_pin"
not found. Please verify that:
1. The specified design element actually exists in the original design.
2. The specified object is spelled correctly in the constraint source file.
make: *** [__xps/ml507_bsb_system_routed] Error 1
----END error below
