this is specially for the xilinx employees,
i havent made any changes to the design created by base system builder,
yet it gives the following warnings
WARNING:MDT - PORT:EXT_BRK CONNECTOR:Ext_BRK -
D:\Xilinx_10.1\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v7_10_a\data\mic
roblaze_v2_1_0.mpd line 189 - No driver found. Port will be driven to GND!
WARNING:MDT - PORT:EXT_NM_BRK CONNECTOR:Ext_NM_BRK -
D:\Xilinx_10.1\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v7_10_a\data\mic
roblaze_v2_1_0.mpd line 190 - No driver found. Port will be driven to GND!
WARNING:MDT - PORT:IWAIT CONNECTOR:ilmb_LMB_Wait -
D:\Xilinx_10.1\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v7_10_a\data\mic
roblaze_v2_1_0.mpd line 196 - No driver found. Port will be driven to GND!
WARNING:MDT - PORT:DWAIT CONNECTOR:dlmb_LMB_Wait -
D:\Xilinx_10.1\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v7_10_a\data\mic
roblaze_v2_1_0.mpd line 232 - No driver found. Port will be driven to GND!
WARNING:MDT - PORT:I_ADDRTAG CONNECTOR:ilmb_M_ADDRTAG -
D:\Xilinx_10.1\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v7_10_a\data\mic
roblaze_v2_1_0.mpd line 194 - floating connection!
WARNING:MDT - PORT:D_ADDRTAG CONNECTOR:dlmb_M_ADDRTAG -
D:\Xilinx_10.1\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v7_10_a\data\mic
roblaze_v2_1_0.mpd line 235 - floating connection!
Performing Clock DRCs...
