Re: Xilinx DDR2 Interface Simulation Memory Range Limits

chuyantao · ‎05-27-2011

I also facing this new error,

waiting for reply!

thanks!

rcingham · ‎09-09-2010

Do what it says in post 5 in the thread.

If you run out of memory, you need a 64-bit simulator running on a 64-bit OS.

------------------------------------------
"If it don't work in simulation, it won't work on the board."

ssudhasa · ‎12-21-2011

Hi,

I am also getting the same error, I am using 1 GB ddr2 memory size.

I have tried the 'define+MAX_MEM option' , but using this modelsim crashes ,

does any budy got the solution of this issue.

--Sudhanshu saxena

rcingham · ‎09-09-2010

How does ModelSim crash?
Is there any message on the transcript file?
Is there a 'vish_stacktrace.vstf' file?

What version of ISE are you using?
What version of ModelSim?
What version of ddr2 model?

------------------------------------------
"If it don't work in simulation, it won't work on the board."

Sign In

Don't have a Xilinx account yet?

Simulation and Verification

Re: Xilinx DDR2 Interface Simulation Memory Range Limits

Re: Xilinx DDR2 Interface Simulation Memory Range Limits

Re: Xilinx DDR2 Interface Simulation Memory Range Limits

Re: Xilinx DDR2 Interface Simulation Memory Range Limits