04-18-2012 10:35 AM
I'm using Virtex 5 110t1136 board, and I wish to lower clock freqency (25 MHz) to 2Mhz in system generaor, how could I do that?
I know some techniques such as using dividers and counters, but I don't know how to implemment it.
How can I find the clock frequency in system generator becasue most of my designs are about mathmetic equations, I don't know how to change clock frequency in system generator.
Thanks a lot.
Solved! Go to Solution.
04-18-2012 11:42 AM - edited 04-18-2012 11:42 AM
You can set the clock frequencies in the SysGen Token and you can edit your sampling frequencies at the Gateway In blocks
04-19-2012 02:48 AM
For low frequencies, you may use clock enable. Make a search for 'clock enable' from: