Sign In

Don't have a Xilinx account yet?

  • Choose to receive important news and product information
  • Gain access to special content
  • Personalize your web experience on Xilinx.com

Create Account

Username

Password

Forgot your password?
XClose Panel
Xilinx Home
Reply
Visitor
karnhwa
Posts: 4
Registered: ‎01-03-2008
0
Accepted Solution

Xilinx FMC-HMI

I am looking Xilinx FMC-HMI module as what is shown in this youtube : http://www.youtube.com/watch?v=GgBv6Zdox8M

Where can i find the datasheet and the purchasing information? 

 

I have been looking around in Xilinx Web and google but no luck.

 

Regards,

 

Xilinx Employee
mcgett
Posts: 3,513
Registered: ‎01-03-2008

Re: Xilinx FMC-HMI

[ Edited ]

The YouTube clip makes it pretty clear that it isn't a Xilinx board, but a Xylon board. Add a comment to the YouTube clip asking for more information on the board if it is not already posted on the Xylon logicBricks website.

------------------------------------------------------------------
Have you tried typing your question into Google? If not you should before posting.
Too many results? Try adding site:www.xilinx.com
Visitor
karnhwa
Posts: 4
Registered: ‎01-03-2008
0

Re: Xilinx FMC-HMI

Thanks for the reply.

 

If you look at the video again in 0:14, you can actually see that it's a Xilinx board.

Also I had got a reply from Xylon that this is a prototype from Xilinx that is not yet in the market.

Expert Contributor
eteam00
Posts: 7,505
Registered: ‎07-21-2009
0

Re: Xilinx FMC-HMI

[ Edited ]

Ed,

 

Karnhwa is at least partially correct.  The base board is a Xilinx product.  The FMC-HMI add-on board does not turn up in search engines, perhaps it is a yet-unreleased product?

 

-- Bob Elkind

SIGNATURE:
README for newbies is here: http://forums.xilinx.com/t5/New-Users-Forum/README-first-Help-for-new-users/td-p/219369

Summary:
1. Read the manual or user guide. Have you read the manual? Can you find the manual?
2. Search the forums (and search the web) for similar topics.
3. Do not post the same question on multiple forums.
4. Do not post a new topic or question on someone else's thread, start a new thread!
5. Students: Copying code is not the same as learning to design.
6 "It does not work" is not a question which can be answered. Provide useful details (with webpage, datasheet links, please).
7. You are not charged extra fees for comments in your code.
8. I am not paid for forum posts. If I write a good post, then I have been good for nothing.
Xilinx Employee
mcgett
Posts: 3,513
Registered: ‎01-03-2008
0

Re: Xilinx FMC-HMI

The base board is the ZC702 and this is currently shipping. Since my organization does all of the boards at Xilinx that we sell, I should know about the FMC module and I don't. The FMC module does not use a Xilinx numbering scheme and I can tell from the video that it will have an extremely low probability of passing CE certification for sale, so this can't be board built by Xilinx with the intent to sell.
------------------------------------------------------------------
Have you tried typing your question into Google? If not you should before posting.
Too many results? Try adding site:www.xilinx.com
Expert Contributor
eteam00
Posts: 7,505
Registered: ‎07-21-2009
0

Re: Xilinx FMC-HMI

[ Edited ]

The FMC module does not use a Xilinx numbering scheme and I can tell from the video that it will have an extremely low probability of passing CE certification for sale, so this can't be board built by Xilinx with the intent to sell.

 

The mystery deepens.

 

One would think that it would be (at the very least) "awkward" for the Xylon folks to publish a youtube video showing an unreleased product or a prototype which is not intended for release.  In my experience, such practice would result in some very uncomfortable meetings with some very emphatic requests for 'explanations'.

 

Of course, this is mostly based on mere speculation, yes?

 

I've sent off my own inquiry to the Xylon folks, perhaps this will all be cleared up in short order.

 

-- Bob Elkind

SIGNATURE:
README for newbies is here: http://forums.xilinx.com/t5/New-Users-Forum/README-first-Help-for-new-users/td-p/219369

Summary:
1. Read the manual or user guide. Have you read the manual? Can you find the manual?
2. Search the forums (and search the web) for similar topics.
3. Do not post the same question on multiple forums.
4. Do not post a new topic or question on someone else's thread, start a new thread!
5. Students: Copying code is not the same as learning to design.
6 "It does not work" is not a question which can be answered. Provide useful details (with webpage, datasheet links, please).
7. You are not charged extra fees for comments in your code.
8. I am not paid for forum posts. If I write a good post, then I have been good for nothing.
Visitor
karnhwa
Posts: 4
Registered: ‎01-03-2008
0

Re: Xilinx FMC-HMI

This is the reply i get from Xylon Sales team, is actually Xylon that had suggested me to check with Xilinx. But since Xilinx rep has no clue, i probably stop searching.

 

------------------- Original Message -------------------

 

Hi Lau,

Thank you for your email.

FMC-HMi is still not publicly available. Please check with your Xilinx contacts if they can provide or lend one. We have only one FMC-HMI for our own development.

I am not sure who will distribute the board: Xilinx and/or Digilent.

Please let us know if you have any other questions.

Thank you,

Predrag Vidas

Xylon Sales Team


------------------- Original Message -------------------
From: KarnHwa Lau
Received: 13.7.2012 10:49
To: Xylon Support Team
Subject: logiREF-ZHMI-FMC: FMC-HMI board

Hi,

 

I would like to know if XYLON is selling the FMC-HMI board as shown in the demo video? Or where can I get that?

I had been searching around Xilinx website but no clue.

 

Regards,

KarnHwa,Lau

 

Xilinx Employee
slogan
Posts: 6
Registered: ‎03-19-2012

Re: Xilinx FMC-HMI

Hi KarnHwa,

The FMC module you see in this video is being produced by Digilent. It is not released at this stage. I expect it should be released in the September timeframe. You can check with Digilent and your local Xilinx/distributor sales person to find out more.

 

It is the ZC702 that is shown alongside the HMI FMC module. The ZC702 base board is for sale now.

 

Regards,

Steve Logan

FMC Marketing Manager

Expert Contributor
eteam00
Posts: 7,505
Registered: ‎07-21-2009
0

Re: Xilinx FMC-HMI

[ Edited ]

Steve,

 

Thank you for the clarification.

 

-- Bob Elkind

SIGNATURE:
README for newbies is here: http://forums.xilinx.com/t5/New-Users-Forum/README-first-Help-for-new-users/td-p/219369

Summary:
1. Read the manual or user guide. Have you read the manual? Can you find the manual?
2. Search the forums (and search the web) for similar topics.
3. Do not post the same question on multiple forums.
4. Do not post a new topic or question on someone else's thread, start a new thread!
5. Students: Copying code is not the same as learning to design.
6 "It does not work" is not a question which can be answered. Provide useful details (with webpage, datasheet links, please).
7. You are not charged extra fees for comments in your code.
8. I am not paid for forum posts. If I write a good post, then I have been good for nothing.
Visitor
karnhwa
Posts: 4
Registered: ‎01-03-2008
0

Re: Xilinx FMC-HMI

Hello Steve,

 

Thanks for the short and precise information, that's what I need.a Kudo for you!

I shall check with Digilent on that board.

I had already own a ZC702 eval board on my desk.

 

Regards,

KarnHwa,Lau