Xilinx Boards and Kits

[xongo]

Hi,

I am using XUPV2P board for my thesis. Somehow few zip files from Xilinx webpack 10.1 installation got corrupted and  I am getting synthesis errors due to faulty installation.

I have been trying to download 11.1, but it doesn't support XUPV2P. what should I do? where can I find Xilinx 10.1? is there any way to download individual corrupt zip files?

Your early response can help me a lot.

Thanks 

Maruf 

[drjohnsmith · Accepted solution]

HI

when you go onto the xilinx web site, bottom left is the web pack install  icon.

click on that, and you will get to here.

http://www.xilinx.com/tools/webpack.htm

click on download ise web pack , and enter the information to log in.

you will end up at your entitalments page.

on the left in quick links, you will see a link to 

register and download 10.1 and earlier software.

good luck

[xongo]

FANTASTICO!!


Thank you very much

[jeffjozwiak]

From what I've seen on the Digilent website, you can't use Webpack. Am I wrong? I've been looking for support tools for XUPV2P for some time. I always hit a road block.

 http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,400,794&Prod=XUPV2P

jeff

[xongo]

you can definitely use webpack with XUPV2P board. And you will need EDK tools for embedded development.

just keep in mind that xilinx ise 11.1 and above won't support XUPV2P. you will need earlier versions. 

--

Maruf