|
|
|
|
|
Xilinx User Community Forums :
Embedded Solutions :
EDK and Platform Studio :
Re: ISE v11.3 PAR with embedded processors errors out- unable to modify the file system.xmp
|
|
|
|
|
|
|
ISE v11.3 PAR with embedded processors errors out- unable to modify the file system.xmp
|
|
jghelani1
Visitor
Posts: 10
Registered: 02-17-2009
Message 1 of 3
Viewed 126 times
|
|
|
When attempting to perform a Xilinx ISE 11.3 Place and Route with embedded processors, I get an error stating it couldn't modify the file system.xmp (see transcript below). The file in question is not flagged as read only. Works fine on my local PC.
Started : "XPS Process: Synthesize XPS Source".
Xilinx Platform Studio
Xilinx EDK 11.3 Build EDK_LS3.57
Copyright (c) 1995-2009 Xilinx, Inc. All rights reserved. XPS% Evaluating file V:\cmsynergy\ellintj\ccm_wa\itas_ie\FPGA1\edk\system.setprop.tcl
No changes to be saved in MSS file
No changes to be saved in XMP file
No changes to be saved in MSS file
No changes to be saved in XMP file Xilinx Platform Studio
Xilinx EDK 11.3 Build EDK_LS3.57
Copyright (c) 1995-2009 Xilinx, Inc. All rights reserved. XPS% Evaluating file
V:\cmsynergy\ellintj\ccm_wa\itas_ie\FPGA1\place_route\iep_fpga1_top\system.synth
.tcl
make: Nothing to be done for `netlist'.
No changes to be saved in MSS file
No changes to be saved in XMP file
ERROR:ProjectMgmt:387 - TOE: ITclInterp::ExecuteCmd gave Tcl result 'could not set modification time for file "V:/cmsynergy/ellintj/ccm_wa/itas_ie/FPGA1/edk/system.xmp": permission denied'.
Tcl_ErrnoId: EACCES
Tcl_ErrnoMsg: permission denied
_cmd: ::xilinx::Dpm::dpm_chTransformExecute dpm_xpsSynthesize $piThisInterface
errorInfo: could not set modification time for file "V:/cmsynergy/ellintj/ccm_wa/itas_ie/FPGA1/edk/system.xmp": permission denied
while executing
"file mtime $sXmpFilePath $_xmpFileTime"
(procedure "dpm_xpsRunSynthesis" line 22)
invoked from within
"dpm_xpsRunSynthesis $sXmpFilePath $sPnProjDir $iTranInst $iDUInst"
(procedure "dpm_xpsSynthesize" line 25)
invoked from within
"$sCmd $iTransformInstance $sCmdArgs"
(procedure "dpm_chTransformExecuteEngine" line 101)
invoked from within
"dpm_chTransformExecuteEngine $sFlowProc $iInterface $bRunTransformWithEmptyInputSet "
(procedure "::xilinx::Dpm::dpm_chTransformExecute" line 3)
invoked from within
"::xilinx::Dpm::dpm_chTransformExecute dpm_xpsSynthesize $piThisInterface"
|
|
|
|
11-06-2009 01:24 PM
|
|
|
|
|
|
Re: ISE v11.3 PAR with embedded processors errors out- unable to modify the file system.xmp
|
|
 hem_8030
Xilinx Technical Support
Posts: 461
Registered: 08-02-2007
Message 2 of 3
Viewed 118 times
|
|
|
Hi, Is this a mapped drive? Do you have administrative privileges on the project location? Thanks.
|
|
|
|
11-06-2009 08:29 PM
|
|
|
|
|
|
|
|
|
|
|
|
