UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Adventurer
Adventurer
1,379 Views
Registered: ‎01-19-2018

FPGA Kc705 interface with NVIDIA Jetson TX2

Jump to solution

Hi,
Can Microblaze communicate with Jetson through PCIE?
What do we call this kind of communication between XILINX and JETSON TX2
1. Communicate with Jetson via how many protocols?
2. I2C at register level transfer with Color Format and Resolution to Jetson TX2
3. Jetson Tx2 have to take control over IP Cores in FPGA. So software code that runs on the MicroBlaze will it be running on Jeston Tx2. MicroBlaze will be removed from the FPGA design but I'm not sure that how this approach fits.
Best Regards,
Prasanna Daram

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Adventurer
Adventurer
1,840 Views
Registered: ‎01-19-2018

Re: FPGA Kc705 interface with NVIDIA Jetson TX2

Jump to solution

Hi Experts,

how to get the values of Resolution and Video Formats from HDMI RX SS IP and send it to I2C registers?For further sending them to Jetson TX2.

Regards,
Prasanna Daram

0 Kudos
5 Replies
Adventurer
Adventurer
1,305 Views
Registered: ‎01-19-2018

Re: FPGA Kc705 interface with NVIDIA Jetson TX2

Jump to solution

Hi Experts,
Softprocessor has AXI interface to the IP Cores. Powerful multi core processors on TX2 doesn't have direct AXI connection.
SPI communication to interact with external board Jetson TX2.
Kindly respond to this.

Best Regards,
Prasanna Daram

0 Kudos
Adventurer
Adventurer
1,287 Views
Registered: ‎01-19-2018

Re: FPGA Kc705 interface with NVIDIA Jetson TX2

Jump to solution

Hi Experts,

I am using FPGA(kc705) as the Input source (SDI/HDMI IP-core) for Jetson Tx2 board.
and My camera is connected to FPGA board and output of FPGA is connected to CSI port of Jetson Tx2 Board using some costume connector.

In FPGA soft processor MicroBlaze which controls the IP-Core (SDI/HDMI).

Question:
 How to control the IP-Core of FPGA through Jetson Tx2 Board?
ex: UART, SPI, I2C or PCIE?

Also, supportable Linux Drivers are required.
Best Regards,
Prasanna Daram

0 Kudos
Highlighted
Adventurer
Adventurer
1,841 Views
Registered: ‎01-19-2018

Re: FPGA Kc705 interface with NVIDIA Jetson TX2

Jump to solution

Hi Experts,

how to get the values of Resolution and Video Formats from HDMI RX SS IP and send it to I2C registers?For further sending them to Jetson TX2.

Regards,
Prasanna Daram

0 Kudos
1,011 Views
Registered: ‎07-31-2017

Re: FPGA Kc705 interface with NVIDIA Jetson TX2

Jump to solution

Jetson TX2 work as PCIE Mater  and FPGA work as AXI4 PCIE  Slave,

In fpga inner axi4 address space , you can translate the pcie TLP packet to AXI4 W/R  burst

the module you list  connect to crossbar  to receive the the aix4 command

during the last year, i implement this on A7 and x86

good luck to you

0 Kudos
Visitor estradjm
Visitor
703 Views
Registered: ‎07-10-2018

Re: FPGA Kc705 interface with NVIDIA Jetson TX2

Jump to solution

liquan_hardware, Do you have the code available for your implementation you mentioned?

0 Kudos