UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor iori33
Visitor
637 Views
Registered: ‎02-19-2018

Measuring power consumption with Virtex-7 vc707

Jump to solution

Hello,

 

I am trying to measure the power consumption of custom IC, which is powered by "VADJ_FPGA" from the vc707 board. 

Is there a way to measure it in mW or uW scale?.

 

Thank you.

 

 

 

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
587 Views
Registered: ‎04-18-2011

Re: Measuring power consumption with Virtex-7 vc707

Jump to solution

https://www.xilinx.com/support/answers/39037.html

 

This AR should help

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
5 Replies
Scholar drjohnsmith
Scholar
610 Views
Registered: ‎07-09-2009

Re: Measuring power consumption with Virtex-7 vc707

Jump to solution

put a multi meter on the supply.

 

power ( voltage and current ) measurement is not available in the chips,

 

 

0 Kudos
Visitor iori33
Visitor
598 Views
Registered: ‎02-19-2018

Re: Measuring power consumption with Virtex-7 vc707

Jump to solution
It is fabricated and packaged chip I made. I built PCB board to test it.
It is powered by UCD9248 TI chip in Virtex-7 FPGA board. I used the power called "VADJ_FPGA", which is user controllable. I am asking if I can measure the current at a certain operating mode with the code in SDK or I can measure it with multi-meter on which part of the virtex-7 board.
0 Kudos
Moderator
Moderator
598 Views
Registered: ‎04-18-2011

Re: Measuring power consumption with Virtex-7 vc707

Jump to solution

put a multi meter on the supply. power ( voltage and current ) measurement is not available in the chips

 

Please, Don't do that. 

We lost a very faithful VC707 by attempting this very thing...

 

It would be better to hook up the TI power controller and use the GUI software from TI to read the current output from this regulator. 

Vadj would power a number of FPGA IO banks but you could always get an idea of the power consumption on these from XPE and subtract it. 

Keith 

 

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Visitor iori33
Visitor
589 Views
Registered: ‎02-19-2018

Re: Measuring power consumption with Virtex-7 vc707

Jump to solution

Is there any helpful reference regarding the measurement of the Vadj? 

I just need the difference so it will be very helpful if I can find any way of measuring the current of Vadj even though it is connected to 

something else than the custom IC.

 

0 Kudos
Moderator
Moderator
588 Views
Registered: ‎04-18-2011

Re: Measuring power consumption with Virtex-7 vc707

Jump to solution

https://www.xilinx.com/support/answers/39037.html

 

This AR should help

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------