UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Reply

SDAccel support for Nallatech PCIe-287N

Highlighted
Visitor
Posts: 3
Registered: ‎08-12-2017

SDAccel support for Nallatech PCIe-287N

Hi,

 

I was wondering if anyone tried to target the [url=http://www.nallatech.com/wp-content/uploads/pcie_287pb_1_81.pdf]Nallatech PCIe-287N Dual Kintex-7 FPGA Board[/url] or have some pointers on how to set it up under windows as opposed to linux...

 

Thanks,

 

QG

Moderator
Posts: 5,438
Registered: ‎08-01-2008

Re: SDAccel support for Nallatech PCIe-287N

no its no supported check supported device and boards in this UG
https://www.xilinx.com/support/documentation/sw_manuals/xilinx2017_1/ug1238-sdx-rnil.pdf
Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.
Visitor
Posts: 3
Registered: ‎08-12-2017

Re: SDAccel support for Nallatech PCIe-287N

Hi Balkrishan,

 

Thanks for the response.  But I don't think your response is 100% accurate.  Is the Kintex-7 K325T supported under SDAccel?  If so, then the only issue is whether a BSP exists for SDAccel.  If not, then it is a matter of creating a custom BSP to support the board.  Correct?

 

Thanks,

QG

Visitor
Posts: 3
Registered: ‎08-12-2017

Re: SDAccel support for Nallatech PCIe-287N

I answered my own question. The Kintex-7 K325T is supported under SDAccel, but my specific board is not. So, now it is just a matter of creating a custom BSP to utilize it.