cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
646 Views
Registered: ‎04-01-2016

2017.4 - Create boot image

Hi all,

 

I just upgraded Vivado and SDK from 2016.4 to 2017.4 and now I have problems understanding the programming process. In the latest version there is a separate FSBL required but the first stage bootloader is already saved in the *.bin or *.mcs file. I just pointed to the same location as I did for bootimage generation:

 

CreateBootimage.png

 

Furthermore I get (with two boards) the error that the flash content could not be deleted:

 

Programm_Flash.png

 

I do not have these problems with the old version.

 

Kind regards

Sebastian

0 Kudos
3 Replies
Moderator
Moderator
630 Views
Registered: ‎03-19-2014

Re: 2017.4 - Create boot image

Look at AR70148

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Highlighted
Observer
Observer
568 Views
Registered: ‎03-12-2013

回复: 2017.4 - Create boot image

Hi, is your problem solved ?

I also have some questions when use 2017.4. I do the same as the figure, and the Flash programmed successful, but power on again ,the QSPI not initiate. I don't know how to do next

0 Kudos
Highlighted
Moderator
Moderator
558 Views
Registered: ‎03-19-2014

回复: 2017.4 - Create boot image

Have you changed the boot mode to QSPI after programming the boot.bin?

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos