UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Explorer
Explorer
626 Views
Registered: ‎04-01-2016

2017.4 - Create boot image

Hi all,

 

I just upgraded Vivado and SDK from 2016.4 to 2017.4 and now I have problems understanding the programming process. In the latest version there is a separate FSBL required but the first stage bootloader is already saved in the *.bin or *.mcs file. I just pointed to the same location as I did for bootimage generation:

 

CreateBootimage.png

 

Furthermore I get (with two boards) the error that the flash content could not be deleted:

 

Programm_Flash.png

 

I do not have these problems with the old version.

 

Kind regards

Sebastian

0 Kudos
3 Replies
Moderator
Moderator
610 Views
Registered: ‎03-19-2014

Re: 2017.4 - Create boot image

Look at AR70148

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Highlighted
Observer jxlannie
Observer
548 Views
Registered: ‎03-12-2013

回复: 2017.4 - Create boot image

Hi, is your problem solved ?

I also have some questions when use 2017.4. I do the same as the figure, and the Flash programmed successful, but power on again ,the QSPI not initiate. I don't know how to do next

0 Kudos
Moderator
Moderator
538 Views
Registered: ‎03-19-2014

回复: 2017.4 - Create boot image

Have you changed the boot mode to QSPI after programming the boot.bin?

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos