02-25-2019 03:29 PM
As far I know, the system boots up and has a login terminal. It means that it loads SDCard and passed the FSBL. My student also had a bit of better luck with it and able to mount SD card, But no graphical interface. It is a brand new board that I purchased in late December.
Hope this helps!
03-07-2019 03:35 AM
03-07-2019 09:11 AM
New ZCU102 board MUST use the 2018.3 FSBL.
2018.1 FSBL won't boot.
03-10-2019 12:15 AM - edited 03-10-2019 07:09 AM
2018.3-zcu102-release is working fine on my zcu102 EVB,
And i do see the serial i/f connected and working,
Now where can I download an ubuntu pre-built, img based on 2018.3,
(Like ZCU102_Ubuntu_2.img that doesent work on my EVB from: https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841948/Zynq+UltraScalePlus+MPSoC+-+Ubuntu+Desktop+Step+by+Step+Guide)
So i can run Ubuntu Graphic Desktop using the DisplayPort ?
03-11-2019 08:54 AM
I suggest you ask the Embedded OS forum. I am not aware of 2018.3 pre-build images available yet for ubuntu.
03-18-2019 05:35 AM
For OS related questions, please post in the Embedded Linux forum
03-21-2019 05:12 AM
Probably the mouse and keyboard are not working because you have to set the jumper J7. It's open by default but when you connect it you get the USB HOST/OTG functionality, as described in UG1182.
03-31-2019 05:44 AM - edited 03-31-2019 05:48 AM
I like to thank Aravind, Xilinx for the Image.
Tested on my EVB and this Time its work.
running Ubuntu OS on zcu102 EVB Rev 1.1 version.
09-09-2019 06:50 AM
I really feel like this kind of SODIMM change should be advertised explicitly to people who have bought the newer boards.
The company I work for recently bought the ZCU102 as a temporary dev board and it has taken me 3 days to find this information, and debug why my board wasn't booting.
This should be prominently displayed on the master debug page (https://www.xilinx.com/support/answers/68386.html) and not just mentioned on the "Known Bugs" list, buried amongst the other problems.
At the very least there should be somewhere to list which versions of vivado explicitly WON'T work with the board in some capacity.
09-09-2019 10:19 AM
@dawalters - thanks for the input. I have requested AR68386 and AR 69837 (for the ZCU106, also affected by the DIMM change) be updated to show the solutions for the DIMM. Those pages should go live in a couple of days as they ripple through our system.