UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Adventurer
Adventurer
352 Views
Registered: ‎05-24-2018

QEMU Hardware Error

According to http://www.wiki.xilinx.com/QEMU%20-%20Zynq%20UltraScalePlus,

try to run a Zynq UltraScale+ Linux Kernel Image on Xilinx's ARM QEMU,

After running

$ ./aarch64-softmmu/qemu-system-aarch64 -M arm-generic-fdt -serial mon:stdio -serial /dev/null -display none \
  -device loader,addr=0xfd1a0104,data=0x8000000e,data-len=4

it shows

qemu: hardware error: DTB must be specified for arm-generic-fdt machine model

Aborted (core dumped)

 

0 Kudos
1 Reply
Moderator
Moderator
329 Views
Registered: ‎09-12-2007

Re: QEMU Hardware Error

You need to specify a device tree, for example 

-hw-dtb ./pre-built/linux/images/zynqmp-qemu-arm.dtb

This is shown in the wiki you are pointing to 

0 Kudos