10-23-2020 02:46 AM
Looking for details about configuration and boot of Zynq ultrascale+, in the 'development hub' page there is a link to UG570 but that is about 'ultrascale configuration' and seems to cover just FPGA devices, not SoCs.
I'm interested in configuration using SD card, eMMC, etc. via the PS MIO pins, not the 'traditional' QSPI in bank 0, etc.
10-23-2020 11:13 AM
This page lists a lot of other resources and is the best place to learn about the boot/config process for MPSoC.
10-23-2020 11:54 AM
I'm going to piggy back off this comment since I'm looking for the same thing.
I'm trying to debug my PS and wanted to know what things I can look at to diagnose the issue. What things can I look at between power up and before JTAG responds to see if something is wrong?