cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Observer
Observer
420 Views
Registered: ‎04-20-2019

ZCU102 Load BOOT.BIN and mine.itb from JTAG to RAM and execute it

 

Hi All,

I have ZCU102 evaluation board in which images are booting fine with SD card. Now I want to boot the same images by loading them to RAM using JTAG.

Please help me out in steps to do this.

Present I am able to load u-boot.elf and bl31.elf and start uboot till command line. But my kernel images lies in mine.itb file. Where should I load this file in RAM. If I load it and boot uboot till command line I can just say bootm with its address to proceed further.

Regards,

Shyam

0 Kudos
1 Reply
Highlighted
Xilinx Employee
Xilinx Employee
367 Views
Registered: ‎10-11-2011

I suggest you talk to the Embedded OS forum.

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos