cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Participant
Participant
955 Views
Registered: ‎12-07-2017

ZCU102 PL programming

Jump to solution

 Hello all,

 

I have some general beginner's questions on PL loading.

I need to do this for a proprietary RTOS.

Will appreciate pointers to relevant material or short, high level guidelines:

 

1. Is the CSUDMA the only way to load bitstream to PL (i.e. via PCAP) or there are alternatives?

2. Is Petalinux using this interface or something else can be used as well?

3. Is u-boot using this interface or something else can be used as well?

4. If there is another way, besides the one described in ug1085 - where can I find the documentation on that?

 

Thank you very much

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
1,085 Views
Registered: ‎10-11-2011

CSUDMA is the only way for the processors in the PS to program the bitstream.

Take a look at XilFpga library.

\SDK\2017.4\data\embeddedsw\lib\sw_services\xilfpga_v3_0\doc

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

1 Reply
Highlighted
Xilinx Employee
Xilinx Employee
1,086 Views
Registered: ‎10-11-2011

CSUDMA is the only way for the processors in the PS to program the bitstream.

Take a look at XilFpga library.

\SDK\2017.4\data\embeddedsw\lib\sw_services\xilfpga_v3_0\doc

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post