cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
akash.o
Visitor
Visitor
647 Views
Registered: ‎05-13-2016

Zynq reboot from SDK

Hi,

I'm using ZC702 processor and connected through JTAG for booting from QSPI Flash I have to manually power reset hardware. I'm currently operating device remotely. I tried resetting by writing slcr.PSS_RST_CTRL by writing 0x1 to 0xF8000200 address but it didn't work. Please suggest a way to reboot.

Thanks in advance.

Regards,

Akash.O

0 Kudos
1 Reply
akash.o
Visitor
Visitor
625 Views
Registered: ‎05-13-2016

to perform a software reset was to unlock the SLCR register by writing the value 0xDF0D to SLCR_UNLOCK (0XF8000008) and performing a PSS reset by writing a 0x1 to PSS_RST_CTRL (0xF8000200).

 

This worked for me.

 

Thanks.