cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
wenkerunxin
Visitor
Visitor
331 Views
Registered: ‎12-03-2019

ZynqMP Flash启动问题

Jump to solution

大家好!

        请问有谁知道这是什么原因吗?怎么修复啦?

        Flash能够正常烧录代码,验证通过。但是断电重启,总是停在FSBL的第二阶段。程序没有压缩,只有Golden Bitstream。

        错误信息如下:

wenkerunxin_0-1614674366665.png

 

0 Kudos
1 Solution

Accepted Solutions
denist
Xilinx Employee
Xilinx Employee
259 Views
Registered: ‎10-11-2011

I saw that error before if at power up the PS_POR_B is released too soon and the QSPI is still under reset. Check the PS_POR_B release and the QSPI powerup/reset line.

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

1 Reply
denist
Xilinx Employee
Xilinx Employee
260 Views
Registered: ‎10-11-2011

I saw that error before if at power up the PS_POR_B is released too soon and the QSPI is still under reset. Check the PS_POR_B release and the QSPI powerup/reset line.

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post