cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
873 Views
Registered: ‎12-03-2017

Codic 5.0 in System Generator dosen't have output

Jump to solution

I want to test the function of Translate complex num to real and phase with Cordic 5.0. 

But whatever I change the input type or parameters in Cordic 5.0, it just display the 0.

I want to know where I need to change.

Thanks!

截图20171204103657.png

Tags (1)
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
1,205 Views
Registered: ‎08-01-2008

Re: Codic 5.0 in System Generator dosen't have output

Jump to solution

what is your tool versions. You may not simulating for enough time . Can you try putting inf in simulation time. You can generate netlist and simulate in Vivado

I would also recommend you to use latest version of vivaodo and cordic.

 

when i simulated for 100 simulation time its working fine 

Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.

View solution in original post

tt.png
0 Kudos
1 Reply
Highlighted
Xilinx Employee
Xilinx Employee
1,206 Views
Registered: ‎08-01-2008

Re: Codic 5.0 in System Generator dosen't have output

Jump to solution

what is your tool versions. You may not simulating for enough time . Can you try putting inf in simulation time. You can generate netlist and simulate in Vivado

I would also recommend you to use latest version of vivaodo and cordic.

 

when i simulated for 100 simulation time its working fine 

Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.

View solution in original post

tt.png
0 Kudos