cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Observer
Observer
8,754 Views
Registered: ‎11-07-2013

Digital Down Converter 1.0 on Virtex-6

I have an old ISE project that uses the Digital Down Converter 1.0 IP core. I need to convert to be used in ISE 14.4 but the DDC in that version looks to only support LTE and CDMA spectrums. Is there a way to get the Digital Down Converter 1.0 IP core to work with Virtex-6, even if it is not able to be optimized?

 

Thank you

Tags (4)
0 Kudos
2 Replies
Highlighted
Xilinx Employee
Xilinx Employee
8,738 Views
Registered: ‎02-06-2013

Hi

 

You can use the v1.1 core present in the latest version ISE14.7

 

It supports all the features supported in v1.0.

Regards,

Satish

--------------------------------------------------​--------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful.
--------------------------------------------------​-------------------------------------------
0 Kudos
Highlighted
Observer
Observer
8,729 Views
Registered: ‎11-07-2013

Thank you for the reply, but what is currently in the IP core library is the DUC/DDC Complier which only supports specific wireless standards. The Digital Down Converter was a core generated in ISE 9.2 and was able to be used with a range of frequencies, I need something that's not specific to LTE and CDMA. Is my only option to digitally mix my signals and use a BPF?

 

Thanks again.

0 Kudos