UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Newbie jpalmows
Newbie
227 Views
Registered: ‎08-23-2019

Problem with start_debug_interface od dpd_v9_0_dbg on matlab environmet

I have a problem with start_debug_interface in matlab 2019R.

I use OS Ubuntu 18.04.2 LTS \n \l. and Xilinx_Vivado_Lab_Lin_2018.3_1207_2324.

I have below problem after start command:

>> start_debug_interface
Operands to the || and && operators must be convertible to logical scalar values.

Error in jtag_init

Error in start_debug_interface

Maybe do you have some tip of this problem, please help me.

Best regards, 

Jacek

0 Kudos
1 Reply
Moderator
Moderator
162 Views
Registered: ‎08-16-2018

Re: Problem with start_debug_interface od dpd_v9_0_dbg on matlab environmet

Vivado 2018.3 supports Ubuntu 18.04 and Matlab 2018a; but this version of MATLAB does not support "Ubuntu 18.04". 
This could be a possible reason. 

 

Also, please share the message on the "Debug sever window" which can help us further to understand the issue. 

 


/ 7\7     Meher Krishna Patel, PhD
\ \        Senior Product Application Engineer, Xilinx
/ /        
\_\/\7   It is not so much that you are within the cosmos as that the cosmos is within you...
0 Kudos