cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
1,145 Views
Registered: ‎02-01-2018

System generator and LDPC

Jump to solution

Hi

Does System Generator support HDL generation from Simulink for LDPC IP, such as the one below? If so, what tool versions should be used? (MATLAB and Vivado)

 

https://www.xilinx.com/products/intellectual-property/ef-di-ldpc-enc-dec.html

 

 

Thanks

Farzad

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
1,421 Views
Registered: ‎08-01-2008
no LDPC block not available Sysgen Library . You required to use through Vivado design flow
Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.

View solution in original post

0 Kudos
2 Replies
Moderator
Moderator
1,106 Views
Registered: ‎08-01-2007

I think the LDPC encoder/decoder is not added into System Generator library, however, you can generate the LDPC encoder/decoder in Vivado, then import the IP into System Generator using Blackbox component in SysGen.

0 Kudos
Highlighted
Xilinx Employee
Xilinx Employee
1,422 Views
Registered: ‎08-01-2008
no LDPC block not available Sysgen Library . You required to use through Vivado design flow
Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.

View solution in original post

0 Kudos