UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer aviblanka71
Observer
293 Views
Registered: ‎11-21-2018

Use different AXI4-lite clock in system generator

I've built a waveform generator in system generator and I wanted to use a AXI4-Lite interface to set the settings for it,

I've set the Implementation Interface on the Xilinx gateway blocks to "AXI4-Lite" which gives me the interface, however it is clocked at the rate of my waveform data generator (40 MHz). I want to separtae the clock for in/out gateway, Is there anyway I can separate the clocks in system generator so that I can run the AXI4-Lite interface at 100-200MHz. while I run the waveform generation at 40 MHz? 

0 Kudos
1 Reply
Moderator
Moderator
223 Views
Registered: ‎08-16-2018

Re: Use different AXI4-lite clock in system generator

duplicate of https://forums.xilinx.com/t5/DSP-IP-and-Tools/Use-different-AXI4-lite-clock-in-system-generator/m-p/955943/highlight/false#M9821

/ 7\7     Meher Krishna Patel, PhD
\ \        Senior Product Application Engineer, Xilinx
/ /        
\_\/\7   It is not so much that you are within the cosmos as that the cosmos is within you...
0 Kudos