cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
sayanseth
Visitor
Visitor
931 Views
Registered: ‎12-20-2018

Display Output in Monitor using HDMI Interface in ZCU104 Board running DNNDK

I'm using DNNDK in ZCU104 Board which is connected to Monitor using HDMI Cable. But It is not showing any Linux GUI. Monitor Resolution 1600x900.

How to show to output from camera and classification program directly to the Monitor, without using X11 forwarding?

0 Kudos
5 Replies
jheaton
Xilinx Employee
Xilinx Employee
877 Views
Registered: ‎03-21-2008

The DNNDK Linux image supports only Display Port.

0 Kudos
sayanseth
Visitor
Visitor
871 Views
Registered: ‎12-20-2018

ZCU104 BOARD include one HDMI Tx Port and one HDMI Rx Port. Can this problem can be solved by using HDMI to Display Port Adapter connected to Montor that supports Display Port? Or I cannot use a Montior with this board?

0 Kudos
watari
Teacher
Teacher
867 Views
Registered: ‎06-16-2013

Hi @sayanseth 

 

Would you refer the following post, if you use DP-HDMI adapter ?

 

https://forums.xilinx.com/t5/Video/Display-Port-to-HDMI-adapters/td-p/838099

 

BTW, I suggest you to use DP port without any adapter.

It is easy way to resolve your issue.

 

Best regards,

 

0 Kudos
terryo
Xilinx Employee
Xilinx Employee
847 Views
Registered: ‎01-21-2014

What @jheaton is saying is that you HAVE to use the DisplayPort output with the image provided by the DNNDK eval package. No video is being sent to the HDMI port. 

 

Terry

 

0 Kudos
sayanseth
Visitor
Visitor
841 Views
Registered: ‎12-20-2018

Okay. Thank you for your reply.

0 Kudos