10-26-2018 02:59 AM
When I follow with DNNDK user's guide and run ./install.sh, it failed like this:
root@zcu104:/mnt/dnndk/deephi_dnndk_v2.07_beta/ZCU104# ./install.sh Begin to install DeePhi DNNDK ... Install DeePhi DPU Driver ... [ 138.708914] dpu: version magic '4.14.0+ SMP mod_unload aarch64' should be '4.14.0 SMP mod_unload aarc modprobe: can't load module dpu (extra/dpu.ko): invalid module format Installation failed!
How can I fix the error?
10-26-2018 09:13 AM - edited 10-26-2018 09:15 AM
@herryinstall.sh is targetted to run on your Ubuntu machine in order to install DNNDK. You would later copy specific files over to your ZCU104 in order to deploy the network. That is why the driver install is complaining that the architecture is incorrect "aarch64" versus ARM.
10-29-2018 04:03 PM - edited 10-29-2018 04:06 PM
(base) jchang@x86:~/Downloads/deephi_dnndk_v2.07_beta/ZCU104$ ./install.sh Begin to install DeePhi DNNDK ... DeePhi DNNDK package could only be installed on ARM targets. Please contact email@example.com for more help. Terminate installation ... Installation failed!
I am targeting a ZCU102, which should be similar to the ZCU104. Installing it on the ZCU102 works:
root@xlnx:/home/linaro/deephi_dnndk_v2.07_beta/ZCU102# ./install.sh Begin to install DeePhi DNNDK ... Install DeePhi DPU Driver ... [ 3874.527618] [DPU]Checking DPU signature at addr = 0x8ff00000, [ 3874.534177] [DPU]DPU signature checking done! Install DeePhi tools, runtime & libraries ... Complete installation successfully.
10-29-2018 04:30 PM - edited 10-29-2018 04:30 PM
10-30-2018 12:31 AM
How did you operate? Copy the ZCU104 folder to the ZCU104 board and run the install directly？Do you have to upgrade the image ? The document says that to download the new image, I downloaded the image, but I don’t know how to use .
10-30-2018 01:06 AM
After downloading the image, please burn the image file into SD card using dd command or win32diskimager. After boot the board, please copy the DNNDK package on to the board and than run install.sh.
Please note the driver only support image downloaded from our website.
If there is further question, please let us know.
11-22-2018 05:55 PM
I downloaded deephi's official *.img file and copied it to the SD card using win32diskimager along with the zcu104 linux system , An error occurred while running install.sh
11-23-2018 02:13 AM
Please check following information:
the name of image file: 2018-10-11-ZCU104-desktop-stretch.img
DNNDK package: deephi_dnndk_v2.07_beta.tar
After burn the SD card using win32diskimager and boot the board, please scp the package to board, extract package and use ZCU104 install.sh.
If error still exist, please show the error log.
11-25-2018 07:50 PM
I burn the SD card using win32diskimager and boot the board,then can't read image;
An error occurred when installing install.sh after the Linux system was loaded