cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jack_bonnell
Observer
Observer
340 Views
Registered: ‎06-05-2019

Implementing Vitis-AI 1.2 on VCS-1

I have looked at the page to run the DNNDK tutorials and all i can see is the ability to run the DNNDK on https://github.com/Xilinx/Vitis-AI/blob/master/DPU-TRD/prj/Vitis/README.md#521-build-the-hardware-design is there any more guides etc so i can set up the DNNDK on our VCS1 board or maybe an ultra96v2?

All the Best,

Jack

0 Kudos
2 Replies
jasonwu
Moderator
Moderator
256 Views
Registered: ‎03-27-2013

Hi @jack_bonnell ,

 

Currently I am working on that. Please check the webpage here:

https://github.com/gewuek/vitis_ai_custom_platform_v1.2_tmp

Please feel free to let me know if you find any typo or information missing.

The platform creation part should work. I need to do some modification on compile kernel ELF, should be finished soon.

I am afraid that the original 2019.2+VAI1.1 version tutorial is under internal review so that I need to keep the whole repository unmodified. Would be moved  back to https://github.com/gewuek/vitis_ai_custom_platform_flow after the internal review.

Best Regards,
Jason
-----------------------------------------------------------------------------------------------
Please mark the Answer as "Accept as solution" if the information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
-----------------------------------------------------------------------------------------------
0 Kudos
jack_bonnell
Observer
Observer
234 Views
Registered: ‎06-05-2019

Thanks you! i will do!

All the best,

Jack

0 Kudos