cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Observer
Observer
152 Views
Registered: ‎04-23-2020

ML-SSD-PASCAL run.sh: file not found error

Hi 

I try to run ML-SSD-PASCAL on ZCU102 board.

I copy all inside ML-SSD-PASCAL\ref_training\ZCU102_Application files to board /ZCU102/samples.

When I use "make" to compiler code and I use "source run.sh" to run.

It show "-sh: source: run.sh: file not found".

Did I lose some step to cause this error?

I also tried to use "sh run.sh".

It show below message.

[DNNDK] DPU configuration mismatch for kernel ssd.
Please update DNNC to configurable version v3.0 and rebuild network to run on this DPU.

 

Thanks.

yumei

 

 

0 Kudos
2 Replies
Highlighted
Moderator
Moderator
124 Views
Registered: ‎08-16-2018

It looks the same issue as in below post. 

https://forums.xilinx.com/t5/AI-and-Vitis-AI/About-the-DPU-Target-version-issue/td-p/963748

Issue is fixed in above post. Can you please try the suggestion in above link?


/ 7\7     Meher Krishna Patel, PhD
\ \        Senior Product Application Engineer, Xilinx
/ /        
\_\/\7   It is not so much that you are within the cosmos as that the cosmos is within you...
0 Kudos
Highlighted
Observer
Observer
87 Views
Registered: ‎04-23-2020

Hi

I saw this issue some reply to say:

  • Then the DPU that gets loaded into the PL at boot is version 1.3.0
  • The DNNC compiler can be set to version 1.3.0 by running source ./install.sh ZCU102 from the host_x86 dir in the install package

Do it mean I need to use decent.sh and dnnc_ZCU102.sh in new DNNC version.

Because original elf file in ML-SSD-PASCAL was compiled by old DNNC  version.

But I could not filnd float.prototxt and float.caffemodel.

Can I download these files in somewhere?

I download ML-SSD-PASCAL file from https://github.com/amoham384/Edge-AI-Platform-Tutorials/tree/master/docs/ML-SSD-PASCAL.

 

My ZCU102 board dexplorer -v information

root@xilinx-zcu102-2019_1:~/ZCU102# dexplorer -v
DNNDK version 3.1
Copyright @ 2018-2019 Xilinx Inc. All Rights Reserved.

DExplorer version 2.0
Build Label: Aug 7 2019 18:36:21

DSight version 1.4
Build Label: Aug 7 2019 18:36:21

DDump version 1.0
Build Label: Aug 7 2019 18:36:21

N2Cube Core library version 3.0
Build Label: Aug 7 2019 18:36:17

DPU Driver version 3.0.0

Thanks

yumei

 

0 Kudos