We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Showing results for 
Search instead for 
Did you mean: 

Webinar: Verify Xilinx Zynq UltraScale+ RFSoC System Performance with MATLAB and Simulink

Xilinx Employee
Xilinx Employee
0 1 3,024

The Zynq UltraScale+ RFSoC revolutionized RF and wireless systems by introducing a programmable device with integrated RF data converters. Traditionally, the RF design world and digital design worlds were separated - only connected by a JESD204 interface. Neither digital nor RF engineers needed or cared much about the other domain. That has changed now that the Zynq UltraScale+ RFSoC has brought them together in one device; increasingly, it will be critical that RF engineers understand more of the digital domain and vice-versa. To help engineers learn to work across both domains, Avnet and Mathworks are introducing a series of training and tools that target the Zynq UltraScale+ RFSoC.


In this webinar, Avnet and Mathworks will demonstrate new tools that enable MATLAB and Simulink connection via Ethernet to the Xilinx Zynq UltraScale+ RFSoC. This greatly simplifies the implementation of a real-world radio, both in transmit and receive and in system simulation and characterization. The new tools allow engineers to easily configure both the digital and RF sections of the Zynq UltraScale+ RFSoC 8x8 (XCZU28DR) device and subsequently measure and characterize RF/system performance. In the webinar, engineers will demonstrate 1) how to define RF test criteria for the Zynq UltraScale+ RFSoC, 2) how to connect MATLAB and Simulink tools to the evaluation hardware, and 3) how to analyze and characterize the system. Ultimately, these tools can be used to enable system and algorithm engineers to evaluate architectures and algorithms quickly in a real-world radio environment.


This webinar will be useful for

  • Wireless communications system designers seeking high-level modeling of the entire signal chain from antenna to baseband
  • RF designers implementing RF front-ends for Zynq UltraScale+ RFSoC
  • FPGA designers implementing high-speed digital signal processing used in wireless or RF analog systems.


Register now:



For more information on Zynq UltraScale+ RFSoC, visit:


1 Comment
Observer noamlevine