cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Fason
Visitor
Visitor
126 Views
Registered: ‎04-18-2021

Problems installing U50

Jump to solution

After I correctly installed U50 on the server, I entered the "sudo lspci - VD 10ee:" command in the Linux system terminal, and could not feedback the correct information.

0 Kudos
1 Solution

Accepted Solutions
JohnFedakIV
Moderator
Moderator
88 Views
Registered: ‎09-04-2020

Hi @Fason,

Welcome to the Xilinx Forums!

The Alveo Card Debug Guide has a section on possible scenarios when a card is not recognized by the $sudo lspci -vd 10ee: command:
https://xilinx.github.io/Alveo-Cards/master/debugging/docs/card-not-recognized.html#card-not-recognized-under-lspci

Regards,
~John

----------------------------------------------------------------------------------
* Please don't forget to reply, kudo and accept as a solution! *

View solution in original post

0 Kudos
1 Reply
JohnFedakIV
Moderator
Moderator
89 Views
Registered: ‎09-04-2020

Hi @Fason,

Welcome to the Xilinx Forums!

The Alveo Card Debug Guide has a section on possible scenarios when a card is not recognized by the $sudo lspci -vd 10ee: command:
https://xilinx.github.io/Alveo-Cards/master/debugging/docs/card-not-recognized.html#card-not-recognized-under-lspci

Regards,
~John

----------------------------------------------------------------------------------
* Please don't forget to reply, kudo and accept as a solution! *

View solution in original post

0 Kudos