UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor magiclamp
Visitor
142 Views
Registered: ‎07-23-2019

command to check temperature of alvero U200

Jump to solution

Hello,

whats the command to check the temperature of Alvero U200 passive board? I know the MGMT PF has in-band temp sensor and I have the XRT runtime lib installed already. Thanks for you help!

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
139 Views
Registered: ‎10-19-2015

Re: command to check temperature of alvero U200

Jump to solution

Hi @magiclamp 

If you have the Alveo card and XRT installed, you can use $xbutil query

The temperature will be displayed like the example excerpt below

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Temperature(C)
PCB TOP FRONT   PCB TOP REAR    PCB BTM FRONT   
39              33              41              
FPGA TEMP       TCRIT Temp      FAN Speed(RPM)  
45              40              1103            
QSFP 0          QSFP 1          QSFP 2          QSFP 3          
0               0               0               0               
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Regards,

M

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
3 Replies
Xilinx Employee
Xilinx Employee
140 Views
Registered: ‎10-19-2015

Re: command to check temperature of alvero U200

Jump to solution

Hi @magiclamp 

If you have the Alveo card and XRT installed, you can use $xbutil query

The temperature will be displayed like the example excerpt below

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Temperature(C)
PCB TOP FRONT   PCB TOP REAR    PCB BTM FRONT   
39              33              41              
FPGA TEMP       TCRIT Temp      FAN Speed(RPM)  
45              40              1103            
QSFP 0          QSFP 1          QSFP 2          QSFP 3          
0               0               0               0               
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Regards,

M

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
Visitor magiclamp
Visitor
59 Views
Registered: ‎07-23-2019

Re: command to check temperature of alvero U200

Jump to solution
Thanks for the response. Looks like the query command cannot return just temperature info. is there a way to get the temp section or just get the FPGA TEMP?
0 Kudos
Xilinx Employee
Xilinx Employee
24 Views
Registered: ‎10-19-2015

Re: command to check temperature of alvero U200

Jump to solution

Hi @magiclamp 

You can use the $xbutil dump command to print out all the xbutil query information in json format and write a script to parse out the information you need. 

There is no command that prints temperature only.

Regards,

M

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos