UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Newbie sgt.seg
Newbie
5,144 Views
Registered: ‎06-26-2014

FT256 Package for Cadsoft Eagle

Jump to solution

Hello,

i need the library Package for the FT256 Coolrunner II XC2C384 in 17*17mm in Cadsoft Eagle. Need this for the Layout of a new PCB and cant find it anywhere. Would be nice if someone could help me.

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
6,524 Views
Registered: ‎04-16-2012

Re: FT256 Package for Cadsoft Eagle

Jump to solution

Hi,

 

It seems like Eagle tool is not supported. 

Check these threads: http://forums.xilinx.com/xlnx/board/crawl_message?board.id=CPLD&message.id=1474

http://forums.xilinx.com/xlnx/board/crawl_message?board.id=OtherSilicon&message.id=90

 

Thanks,

Vinay

--------------------------------------------------------------------------------------------
Have you tried typing your question in Google? If not you should before posting. Also, MARK this is as an answer in case it helped resolve your query/issue.Give kudos to the post that helped you to find the solution.
3 Replies
Xilinx Employee
Xilinx Employee
6,525 Views
Registered: ‎04-16-2012

Re: FT256 Package for Cadsoft Eagle

Jump to solution

Hi,

 

It seems like Eagle tool is not supported. 

Check these threads: http://forums.xilinx.com/xlnx/board/crawl_message?board.id=CPLD&message.id=1474

http://forums.xilinx.com/xlnx/board/crawl_message?board.id=OtherSilicon&message.id=90

 

Thanks,

Vinay

--------------------------------------------------------------------------------------------
Have you tried typing your question in Google? If not you should before posting. Also, MARK this is as an answer in case it helped resolve your query/issue.Give kudos to the post that helped you to find the solution.
Newbie sgt.seg
Newbie
5,138 Views
Registered: ‎06-26-2014

Re: FT256 Package for Cadsoft Eagle

Jump to solution

Hello, thax for answering.

I know, that xilinx does not support Cadsoft eagle, but i thought here might be some withe same problem.

I also only need the package, so the pinnning is done soon, but crating the hole package is quite a lot work and with this numbers of pins a high risk to make mistakes.

0 Kudos
Newbie sgt.seg
Newbie
5,126 Views
Registered: ‎06-26-2014

Re: FT256 Package for Cadsoft Eagle

Jump to solution

I found a solution.

You can use the ULP "make-symbol-device-package-bsdl.ulp" in a Eagle Library and then open the BSDL designed by Xilinx http://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/device-models/bsdl-models/cplds.html and then you can create the Package and so on. It must be controlled a bit, but it seems to work perfectly!