UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

spartan 3E usb-jtag progmming problem

Reply
Highlighted
Visitor
Posts: 2
Registered: ‎02-11-2018

spartan 3E usb-jtag progmming problem

Dear all I am using spartan 3E XC3s500E FG320 FPGA board and i am using impact for programming in boundary scan option after clicking initialization chain board successfully identified then i assigned new configuration file after that i click program xc3s500e but it stuck and following window open
Capture.PNG
Xilinx Employee
Posts: 9,292
Registered: ‎02-27-2008

Re: spartan 3E usb-jtag progmming problem

[ Edited ]

What OS?

 

Note that running ISE is not supported on newer versions of Windows ....

 

What are the warnings, errors (if any)?

Austin Lesea
Principal Engineer
Xilinx San Jose
Visitor
Posts: 2
Registered: ‎02-11-2018

Re: spartan 3E usb-jtag progmming problem

[ Edited ]

I am using window 7 ultimate 

here is my code

when i click abort it shows 

"write cmdbuffer failed 2000000f" in console window

code.PNG
warnings.PNG
Xilinx Employee
Posts: 9,292
Registered: ‎02-27-2008

Re: spartan 3E usb-jtag progmming problem

Windows 7 Pro 32/64-bit is only supported,


Although it does not look like a OS issue.

 

rst is missing from the sensitivity list (it is asynchronous to the clk the way it is written)

 

https://stackoverflow.com/questions/8991223/when-must-a-signal-be-inserted-into-the-sensitivity-list-of-a-process

 

 

Austin Lesea
Principal Engineer
Xilinx San Jose