UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Newbie monster_xie
Newbie
9,222 Views
Registered: ‎05-17-2009

system generator error!

when i double click system generator in simulink ,it's display in follow:

 

 

 

--------------------------------- Version Log ----------------------------------
Version                                 Path
System Generator 10.1.3.1386            D:/Xilinx/10.1/DSP_Tools/common/bin/../../sysgen
AccelDSP 10.1.3.1386                    D:/Xilinx/10.1/DSP_Tools/AccelDSP
Matlab 7.6.0.324 (R2008a)               D:/MATLAB/R2008a
ISE 10.1.03i                            d:/Xilinx/10.1/ISE
--------------------------------------------------------------------------------
Summary of Errors:
Error 0001: Undriven input port
     Block: 'xlsysgen_one_block_sim/Reg Out1'
--------------------------------------------------------------------------------

Error 0001:

Reported by:
  'xlsysgen_one_block_sim/Reg Out1'

Details:
The input ports on this block must be driven by other Xilinx blocks
--------------------------------------------------------------------------------

0 Kudos
15 Replies
Voyager
Voyager
9,218 Views
Registered: ‎05-09-2008

Re: system generator error!

Please send snapshot of model.

 

Kappa.

0 Kudos
Contributor
Contributor
9,207 Views
Registered: ‎05-22-2008

Re: system generator error!

hi

looks line u have an undriven input port..

maybe u haven't connected a gateway in block at input.

 

sandeep

0 Kudos
Newbie monster_xie
Newbie
9,196 Views
Registered: ‎05-17-2009

Re: system generator error!

the snapshot in the attachment!
12.bmp
0 Kudos
Contributor
Contributor
9,175 Views
Registered: ‎05-22-2008

Re: system generator error!

it seems there is a problem with ur Mcode block, it  does not has input and output ports.

it must be a programe error

 

sandeep

 

0 Kudos
Highlighted
Newbie monster_xie
Newbie
9,160 Views
Registered: ‎05-17-2009

Re: system generator error!

this is not my mcode. this is mcode of system generator. when i double click the system gererator icon in the simulink library brower,then above error is show.
0 Kudos
Visitor raguna
Visitor
6,994 Views
Registered: ‎02-16-2011

Re: system generator error!

Hello,

how to overcome this problem?

I am not able to rectify this error.

can you please help me  in this.

 

Regards

Anurag

attach_1.JPG
0 Kudos
Contributor
Contributor
6,989 Views
Registered: ‎05-22-2008

Re: system generator error!

Hi Raguna

 

u have connected only one input to AddSub block. The undrived input of this block is causing this error. If u do not reuire this block u should remove it.

 

cheers

sandeep

0 Kudos
Visitor raguna
Visitor
6,984 Views
Registered: ‎02-16-2011

Re: system generator error!

Thankyou for the quick reply.

Even after giving inputs, I am facing the same problem.

 

 

Regards

Raguna

attach_2.JPG
0 Kudos
Contributor
Contributor
6,970 Views
Registered: ‎05-22-2008

Re: system generator error!

hi

 

this time simulation failed as u have connected the o/p of mux to input of previous one.

do try to read the error message, it will give u a hint .

 

cheers

sandeep

0 Kudos
Visitor raguna
Visitor
4,230 Views
Registered: ‎02-16-2011

Re: system generator error!

Thankyou.

I could rectify this.

but the simulation is very fast that i can not figure out the results properly.

 

PS:PLease find attachment of the simulink file.

0 Kudos
Moderator
Moderator
4,214 Views
Registered: ‎08-01-2007

Re: system generator error!

 
0 Kudos
Moderator
Moderator
4,214 Views
Registered: ‎08-01-2007

Re: system generator error!

 

 

There is a feedback path in the model, try to add "assert" block into this model.

 

 

0 Kudos
Newbie rafael1986
Newbie
4,037 Views
Registered: ‎10-30-2011

system generator error!

hi every one

i have problem with this block set

in its data sheet has been said that when "fwd_inv" not been driven its high

but when i dont drive it or even drive it with high or low logic in any condition it give error that its not driven

can anybody help me ?

model file has been attached

0 Kudos
Xilinx Employee
Xilinx Employee
4,025 Views
Registered: ‎02-11-2010

Re: system generator error!

Is this the same issue seen in this thread, if so, please provide the error message you are seeing, if not, please start a new thread.
0 Kudos
Xilinx Employee
Xilinx Employee
4,023 Views
Registered: ‎02-11-2010

Re: system generator error!

My previous message is for rafael1986
0 Kudos