UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Contributor
Contributor
443 Views
Registered: ‎03-27-2017

How to get the Design files of reVision stack?

Jump to solution

Hi, In here https://www.xilinx.com/products/design-tools/embedded-vision-zone.html#design ,      I see, the following demo's is support by Ultra96 boards, but how can I get these demo files to start my learning of revision stack, or is there any user guide for me? thanks.

 

Screenshot from 2019-01-09 10-21-06.png

0 Kudos
1 Solution

Accepted Solutions
Visitor lixun123
Visitor
433 Views
Registered: ‎09-29-2018

Re: How to get the Design files of reVision stack?

Jump to solution

Hi,you can get the files at:

https://github.com/Xilinx/CHaiDNN

0 Kudos
5 Replies
Visitor lixun123
Visitor
434 Views
Registered: ‎09-29-2018

Re: How to get the Design files of reVision stack?

Jump to solution

Hi,you can get the files at:

https://github.com/Xilinx/CHaiDNN

0 Kudos
Contributor
Contributor
398 Views
Registered: ‎03-27-2017

Re: How to get the Design files of reVision stack?

Jump to solution
thanks,
0 Kudos
Explorer
Explorer
286 Views
Registered: ‎10-24-2008

Re: How to get the Design files of reVision stack?

Jump to solution

@fengwuxxx@lixun123  Please note that CHaiDNN differs from what Xilinx refers to as the "re:Vision" platform.  CHaiDNN is an open-source ML inference platform that leverages SDSoC.  The re:Vision platform integrates the DEEPHi DPU IP and does provide support for the Ultra96.  DNNDK / re:Vision lso leverages SDSoC, but does not have open-source IP and uses a different design flow:

https://www.xilinx.com/products/design-tools/ai-inference/ai-developer-hub.html#edge

Both are viable solutions with their own advantages.  The DNNDK flow is the officially supported flow today, while CHaiDNN is primarly supported via the forums.

The table that you reference is specific to the DNNDK flow.

--Quenton

 

 

 

0 Kudos
Xilinx Employee
Xilinx Employee
283 Views
Registered: ‎01-21-2014

Re: How to get the Design files of reVision stack?

Jump to solution
Highlighted
Observer pstelian2011
Observer
138 Views
Registered: ‎07-02-2013

Re: How to get the Design files of reVision stack?

Jump to solution

Hi Terry,

I had a look to https://github.com/Xilinx/Revision-Getting-Started-Guide, but  the design VCU + CNN for zcu104 is till unavailabel. This is tated on the site:

  • The design .zip file for the 8-stream VCU + CNN ZCU104 production silicon is not yet available

Can you please tell me when will be available? Now is quite a long time since 18.3 is released ...

Best regards,

Stelian

 

0 Kudos