UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Explorer
Explorer
1,014 Views
Registered: ‎03-08-2018

AXI UART IP Core with non AXI interface

Jump to solution

Dear All,

 

I'm trying to implement the UART and came cross Coregen tool can make UART IP for Xilinx FPGA but I think it's for AXI system not non-AXI system.

When I see that document, I'm not sure and can't find whether I can use AXI UART IP Core of Xilinx to non AXI interface.

If we can use it for non-AXI interface, Would you please help me what am I supposed to do ?

 

0 Kudos
1 Solution

Accepted Solutions
Scholar hbucher
Scholar
1,202 Views
Registered: ‎03-22-2016

Re: AXI UART IP Core with non AXI interface

Jump to solution

@love119 The UART IP is exactly a wrapper to adapt the UART protocol to AXI.  If you want to use the UART protocol directly, there are easier ways like this

https://www.nandland.com/vhdl/modules/module-uart-serial-port-rs232.html

vitorian.com --- We do this for fun. Always give kudos. Accept as solution if your question was answered.
I will not answer to personal messages - use the forums instead.
0 Kudos
3 Replies
Scholar hbucher
Scholar
1,006 Views
Registered: ‎03-22-2016

Re: AXI UART IP Core with non AXI interface

Jump to solution

@love119 what non-AXI protocol are you using?

vitorian.com --- We do this for fun. Always give kudos. Accept as solution if your question was answered.
I will not answer to personal messages - use the forums instead.
0 Kudos
Highlighted
Explorer
Explorer
983 Views
Registered: ‎03-08-2018

Re: AXI UART IP Core with non AXI interface

Jump to solution
I meant that I 'd like to use just like directly interfacing the AXI UART IP without AXI BUS system.
0 Kudos
Scholar hbucher
Scholar
1,203 Views
Registered: ‎03-22-2016

Re: AXI UART IP Core with non AXI interface

Jump to solution

@love119 The UART IP is exactly a wrapper to adapt the UART protocol to AXI.  If you want to use the UART protocol directly, there are easier ways like this

https://www.nandland.com/vhdl/modules/module-uart-serial-port-rs232.html

vitorian.com --- We do this for fun. Always give kudos. Accept as solution if your question was answered.
I will not answer to personal messages - use the forums instead.
0 Kudos