UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer tmiddle
Observer
2,096 Views
Registered: ‎01-17-2017

Binary Counter 12.0 Re-customizing IP issue

There seems to be an issue with the verification of the IP.

I had a 32-bit counter with Restrict Count on to 0x5F5E100 I wanted to change to just a 26-bit counter, not Restricted

I changed:

Bits from 32 to 26,

Restrict count to 1

disabled Restrict count

It doesn't let you do this. Giving the error provided below.

To work around this, I needed to first change the Restrict Count and save that then re-open the IP to customize then change the bits down to 26.

Also, and this is a minor annoyance, if you disable the Restrict count it still validates the value. and will error if it is too big, despite being disabled. Setting to 1 avoided that.

 

startgroup
set_property -dict [list CONFIG.SCLR {false}] [get_bd_cells c_counter_binary_0]
endgroup
create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 xlslice_1
set_property location {5.5 1888 32} [get_bd_cells xlslice_1]
connect_bd_net [get_bd_pins c_counter_binary_0/Q] [get_bd_pins xlslice_1/Din]
set_property location {4 1439 28} [get_bd_cells c_counter_binary_0]
set_property location {5 1741 29} [get_bd_cells xlslice_1]
delete_bd_objs [get_bd_nets FPGA_PROG_dout] [get_bd_cells FPGA_PROG]
connect_bd_net [get_bd_ports FPGA_UP] [get_bd_pins xlslice_1/Dout]
startgroup
set_property -dict [list CONFIG.DIN_WIDTH {26} CONFIG.DIN_TO {25} CONFIG.DIN_FROM {25} CONFIG.DIN_FROM {25} CONFIG.DOUT_WIDTH {1}] [get_bd_cells xlslice_1]
endgroup
startgroup
set_property -dict [list CONFIG.Output_Width {26} CONFIG.Restrict_Count {false} CONFIG.Final_Count_Value {3FFFFFE}] [get_bd_cells c_counter_binary_0]
WARNING: [IP_Flow 19-3374] An attempt to modify the value of disabled parameter 'Final_Count_Value' from '05F5E100' to '3FFFFFE' has been ignored for IP 'c_counter_binary_0'
ERROR: [IP_Flow 19-3478] Validation failed for parameter 'Final Count Value(Final_Count_Value)' with value '05F5E100' for BD Cell 'c_counter_binary_0'. Entered  Hexadecimal value 05F5E100 is out of range.
INFO: [IP_Flow 19-3438] Customization errors found on 'c_counter_binary_0'. Restoring to previous valid configuration.
INFO: [Common 17-17] undo 'set_property -dict [list CONFIG.Output_Width {26} CONFIG.Restrict_Count {false} CONFIG.Final_Count_Value {3FFFFFE}] [get_bd_cells c_counter_binary_0]'
ERROR: [Common 17-39] 'set_property' failed due to earlier errors.
endgroup
startgroup
set_property -dict [list CONFIG.Restrict_Count {false}] [get_bd_cells c_counter_binary_0]
endgroup
create_bd_cell -type ip -vlnv xilinx.com:ip:c_counter_binary:12.0 c_counter_binary_1
set_property location {4 1504 114} [get_bd_cells c_counter_binary_1]
connect_bd_net [get_bd_pins c_counter_binary_1/CLK] [get_bd_pins processing_system7_0/FCLK_CLK0]
delete_bd_objs [get_bd_cells c_counter_binary_1]
startgroup
set_property -dict [list CONFIG.Output_Width {26} CONFIG.Restrict_Count {false} CONFIG.Final_Count_Value {1}] [get_bd_cells c_counter_binary_0]
WARNING: [IP_Flow 19-3374] An attempt to modify the value of disabled parameter 'Final_Count_Value' from '05F5E100' to '1' has been ignored for IP 'c_counter_binary_0'
ERROR: [IP_Flow 19-3478] Validation failed for parameter 'Final Count Value(Final_Count_Value)' with value '05F5E100' for BD Cell 'c_counter_binary_0'. Entered  Hexadecimal value 05F5E100 is out of range.
INFO: [IP_Flow 19-3438] Customization errors found on 'c_counter_binary_0'. Restoring to previous valid configuration.
INFO: [Common 17-17] undo 'set_property -dict [list CONFIG.Output_Width {26} CONFIG.Restrict_Count {false} CONFIG.Final_Count_Value {1}] [get_bd_cells c_counter_binary_0]'
ERROR: [Common 17-39] 'set_property' failed due to earlier errors.
endgrou
0 Kudos