UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Explorer
Explorer
1,006 Views
Registered: ‎07-20-2009

Block Diagram validation error when upgrading vivado from 2015.2 to 2017.2

Jump to solution

Hi all,

I recently upgraded my Kintex 7 project from Vivado 2015.2 to 2017.2.

I made sure that all IPs (custom as well as Xilinx) upgraded  by doing report IP status and upgrade.

 

But on validation, the following error occurred which was not there in Vivado 2015.2. All the Slave ports mentioned here are connected to master ports of 3 micro blazes.

 

Any idea how to rectify this error?. Please help.

 

ERROR: [IP_Flow 19-3478] Validation failed for parameter 'Range 3 base(D003_BASE_ADDR)' with value '0x0000000300040000' for BD Cell 'axi_interconnect_0/s00_mmu'. PARAM_VALUE.D003_BASE_ADDR must not overflow SI_ADDR_WIDTH of 32 bits

 

ERROR: [IP_Flow 19-3478] Validation failed for parameter 'Range 3 base(D003_BASE_ADDR)' with value '0x0000000300040000' for BD Cell 'axi_interconnect_0/s01_mmu'. PARAM_VALUE.D003_BASE_ADDR must not overflow SI_ADDR_WIDTH of 32 bits

 

ERROR: [IP_Flow 19-3478] Validation failed for parameter 'Range 3 base(D003_BASE_ADDR)' with value '0x0000000300040000' for BD Cell 'axi_interconnect_0/s07_mmu'. PARAM_VALUE.D003_BASE_ADDR must not overflow SI_ADDR_WIDTH of 32 bits

 

Regards

Anoop

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Explorer
Explorer
1,554 Views
Registered: ‎07-20-2009

Re: Block Diagram validation error when upgrading vivado from 2015.2 to 2017.2

Jump to solution

Hi all,

 

I found a solution.

By default, mmu inside interconnect was not assigned with address automatically. When I unchecked interconnect property IS_MANAGED, Address was assigned automatically and the errors were gone.

 

I wonder why this property?, as auto and manual modes are already there for each IP.

 

Regards

Anoop

0 Kudos
1 Reply
Highlighted
Explorer
Explorer
1,555 Views
Registered: ‎07-20-2009

Re: Block Diagram validation error when upgrading vivado from 2015.2 to 2017.2

Jump to solution

Hi all,

 

I found a solution.

By default, mmu inside interconnect was not assigned with address automatically. When I unchecked interconnect property IS_MANAGED, Address was assigned automatically and the errors were gone.

 

I wonder why this property?, as auto and manual modes are already there for each IP.

 

Regards

Anoop

0 Kudos