cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
412 Views
Registered: ‎06-25-2016

Choosing memory parts issue while generating DDR4 controller

Jump to solution

Hello!

I want to generate DDR4 controller for MIG 2.2 in Vivado 2018.2 for DIMM M393A2K40CB2-CTD or HMA82GR7AFR4N-VKT using xcvu9p FPGA. But there are no such chips in MIG configuratrion window for 'memory part'. Where can I get them?

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
382 Views
Registered: ‎03-21-2018

Hi @slipknotchik ,

To use memory parts which are not available by default through the DDR3/DDR4 SDRAM Vivado IDE, you can create a custom parts CSV file, as specified in the AR: 63462. This CSV file has to be provided after enabling the Custom Parts Data File option. After selecting this option, you are able to see the custom memory parts along with the default memory parts (PG150). 

 

Cheers


Cheers
------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------

View solution in original post

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
383 Views
Registered: ‎03-21-2018

Hi @slipknotchik ,

To use memory parts which are not available by default through the DDR3/DDR4 SDRAM Vivado IDE, you can create a custom parts CSV file, as specified in the AR: 63462. This CSV file has to be provided after enabling the Custom Parts Data File option. After selecting this option, you are able to see the custom memory parts along with the default memory parts (PG150). 

 

Cheers


Cheers
------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------

View solution in original post

0 Kudos