UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Explorer
Explorer
517 Views
Registered: ‎01-23-2018

[Clock control]

Jump to solution

Hi,

 

 

I have to connect a 250MHz input/output signals to send/receive data to/from another entity which runs at 25MHZ, I'm pretty new and I wanted to know if there is some IP Block that can allow me to "save" a value until the second entity can take it and serve as a fifo for the first entity. I knwo this is so basic but it will help a lot if someone can answer.

 

 

Regards,

 

Joel

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Adventurer
Adventurer
637 Views
Registered: ‎03-29-2008

Re: [Clock control]

Jump to solution

Joel, you might not have noticed but you answered your own question.  

 

You mentioned a FIFO,  yes that is what you want.  Check out the FIFO generator in the IP catalog.

 

Have a good day.

 

Nick

1 Reply
Highlighted
Adventurer
Adventurer
638 Views
Registered: ‎03-29-2008

Re: [Clock control]

Jump to solution

Joel, you might not have noticed but you answered your own question.  

 

You mentioned a FIFO,  yes that is what you want.  Check out the FIFO generator in the IP catalog.

 

Have a good day.

 

Nick