UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
611 Views
Registered: ‎07-09-2018

ERROR:Portability:3 in PAR XILINX ISE 14.7

Hi All,

 

My Device Target is XC6VLX550t -2 FF1760.

 

This is the Error i am getting in PAR Phase Of Implementation and here are the Options for MAP and PAR Phase in my Design thru COMMAND Line.

Command Line :

map -p xc6vlx550t-ff1760-2 -w -logic_opt off -lc off -register_duplication off -ol high -mt 2 -o design_map.ncd design.ngd design.pcf

par -w -mt 4 -ol high -xe c design.ncd design.ncd design.pcf

 

 

ERROR:Portability:3 - This Xilinx application has run out of memory or has

   encountered a memory conflict.  Current memory usage is 4078308 kb.  You can

   try increasing your system's physical or virtual memory.  If you are using a

   Win32 system, you can increase your application memory from 2GB to 3GB using

   the /3G switch in your boot.ini file. For more information on this, please

   refer to Xilinx Answer Record #14932. For technical support on this issue,

   you can open a WebCase with this project attached at 

   http://www.xilinx.com/support.

 

Regards,

W.Deepak

 

0 Kudos
5 Replies
Highlighted
Xilinx Employee
Xilinx Employee
593 Views
Registered: ‎07-16-2008

回复: ERROR:Portability:3 in PAR XILINX ISE 14.7

Are you using Windows 32-bit OS? The error is saying that the PAR process has run out of memory.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Moderator
Moderator
585 Views
Registered: ‎01-16-2013

回复: ERROR:Portability:3 in PAR XILINX ISE 14.7

@deepak_wudali,

 

Make sure you are using supported OS with ISE 14.7

https://www.xilinx.com/support/answers/18419.html

 

--Syed

---------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.

Did you check our new quick reference timing closure guide (UG1292)?
---------------------------------------------------------------------------------------------
0 Kudos
561 Views
Registered: ‎07-09-2018

回复: ERROR:Portability:3 in PAR XILINX ISE 14.7

Hi,

I am using centos 64 bit OS linux. Does this not supported??

This Error has nothing to do with implementation and just relies on correct OS to be installed?? Please confirm

Regards,

W.Deepak

0 Kudos
Moderator
Moderator
554 Views
Registered: ‎01-16-2013

回复: ERROR:Portability:3 in PAR XILINX ISE 14.7

@deepak_wudali,

 

Yes, Centos is not supported with ISE 14.7. Using unsupported OS could be one of the many reasons for such errors.

You also need to check if you have machine has sufficient memory to run the application. 

 

--Syed

 

 

---------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.

Did you check our new quick reference timing closure guide (UG1292)?
---------------------------------------------------------------------------------------------
0 Kudos
Moderator
Moderator
486 Views
Registered: ‎09-15-2016

回复: ERROR:Portability:3 in PAR XILINX ISE 14.7

Hi @deepak_wudali,

 

Did you get a chance to debug this further? Is there any update you would like to post?

 

Thanks

Prathik

-----------------------------------------------------------------------------------

Don't forget to reply, kudo, and mark the appropriate post as 'accept as solution'.

-----------------------------------------------------------------------------------

0 Kudos