cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Voyager
Voyager
333 Views
Registered: ‎05-30-2018

How to start with Vivado in Linux

Hello,

Can someone provide me a link how to start with Vivado on Ubuntu.

The launcher is in /tools/Xilinx/Vivado/2020.1/bin

It's is not visible out of this location. Probably should I modify some configuration files

Moreover is there a way to put Vivado icon on Favorites ?

Thanks in advance.

Pavel.

0 Kudos
4 Replies
Highlighted
Explorer
Explorer
314 Views
Registered: ‎05-11-2015

 

Google for  "ubuntu create launcher icon" and you will get about a thousand solutions, maybe 200 of them for your specific release, and possibly a hundred of them not working or badly explained. It's how it is.

There are even videos that show you in 20 minutes what can be written in 2, but writing and reading seems to be highly intellectual activities nowadays.

---------------------------------------------------------------------------------------------------
Have you tried upgrading the operating system of your spirit level?
-------------------------------------------------------------------------------------------------
0 Kudos
Highlighted
Voyager
Voyager
307 Views
Registered: ‎05-30-2018

Running

source /tools/Xilinx/Vivado/2020.1/settings64.sh

fixes the issue with launching Vivado from everywhere

Highlighted
Adventurer
Adventurer
200 Views
Registered: ‎03-13-2019

It is good that it is running

Alternate method:) if you want 

Instead of using every time source command you can add that command in bashrc file

vi ~/.bashrc or gvim ~/.bashrc

source /tools/Xilinx/Vivado/2020.1/settings64.sh

save the bashrc file

source ~/.bashrc

After that you can directly use

vivado

This command it worked for me.
Enjoy your day.
Regards
Pavan

 

0 Kudos
Highlighted
Participant
Participant
166 Views
Registered: ‎07-30-2020

The suggestion for running `settings64.sh` is reflected in the note on page 9 of UG893 Using the Vivado IDE:

TIP:To add the Vivado tools path to your current shell/command prompt, run settings64.bat or settings64.sh from the <install_path>/Vivado/<version> directory.

0 Kudos