cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
ivan_novelic
Visitor
Visitor
245 Views
Registered: ‎03-10-2021

IP packager: Create customization parameters from generics

Jump to solution

Hi,

I am using Vivado 2018.3 to create and package IPs which contain ISERDES, IDELAY and ASYNC FIFO components.

I have instantiated them in component mode and each of them has a set of generics at their top level which I would like to propagate to the IP customization parameters table so that I can edit them from the IP customization GUI in the project which instantiates my custom IP (moreover, I have several IP instantiations where each needs to have different set of generics).

So, I can see the generic when I double click on the RTL component in the block design:

ivan_novelic_0-1624879220655.png

 

But I can not see it in the IP packager, nor connect the one I create in in the Customization Parameters tab to the existing generic in the block design:

 

ivan_novelic_1-1624879275441.png

 

Is there a manual how to do this?

 

Best regards,

Ivan

 

 

0 Kudos
1 Solution

Accepted Solutions
syedz
Moderator
Moderator
241 Views
Registered: ‎01-16-2013

@ivan_novelic 

 

Check topic "Customization Parameters" at page 54 in below user guide. 

https://www.xilinx.com/support/documentation/sw_manuals/xilinx2018_3/ug1118-vivado-creating-packaging-custom-ip.pdf#page=54 

 

--Syed

---------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.

Did you check our new quick reference timing closure guide (UG1292)?
---------------------------------------------------------------------------------------------

View solution in original post

1 Reply
syedz
Moderator
Moderator
242 Views
Registered: ‎01-16-2013

@ivan_novelic 

 

Check topic "Customization Parameters" at page 54 in below user guide. 

https://www.xilinx.com/support/documentation/sw_manuals/xilinx2018_3/ug1118-vivado-creating-packaging-custom-ip.pdf#page=54 

 

--Syed

---------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.

Did you check our new quick reference timing closure guide (UG1292)?
---------------------------------------------------------------------------------------------

View solution in original post