cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Turkey9999999
Observer
Observer
408 Views
Registered: ‎11-11-2020

Is there a way to Instantiate "ISE" "Core Generator" "Logi Core IP" in Vivado 2020?

Jump to solution

Is there a way to pop-up the old "ISE Core Generator" Dialog box inside of Vivado 2020?

Specifically, I want to generate an old ISE style core for use in  a Vivado Project?

I was just curious because many of the ISE cores are actually better for logic design than the newer Vivado IP integrator cores..

 

 

0 Kudos
1 Solution

Accepted Solutions
ashishd
Xilinx Employee
Xilinx Employee
371 Views
Registered: ‎02-14-2014

Hi @Turkey9999999 ,

There isn't a way to launch ISE core generator through Vivado. 

But if you already have Core Generator IP file (.xco), you can add it to Vivado project using 'Add Sources' option. This flow is supported.

Regards,
Ashish
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

View solution in original post

1 Reply
ashishd
Xilinx Employee
Xilinx Employee
372 Views
Registered: ‎02-14-2014

Hi @Turkey9999999 ,

There isn't a way to launch ISE core generator through Vivado. 

But if you already have Core Generator IP file (.xco), you can add it to Vivado project using 'Add Sources' option. This flow is supported.

Regards,
Ashish
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

View solution in original post