UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Adventurer
Adventurer
208 Views
Registered: ‎08-07-2018

Problem when implementing Vivado 2018.3 project with python script in Cygwin.

Greetings ... tell you that a couple of days ago I have a project in Vivado 2017.3, which correctly implemented it from the cygwin terminal with a python script using Vivado 2017.3.
Now the problem I have is that I can't implement the same project using Vivado 2018.3. I already tried to follow the recommendation of the following link,  but I still have the same error shown in the attached image.
Can someone please help me solve this problem. I leave the python script attached.

imp_error.png
0 Kudos
3 Replies
Moderator
Moderator
158 Views
Registered: ‎04-24-2013

Re: Problem when implementing Vivado 2018.3 project with python script in Cygwin.

Hi @cesar182 

After you have made the changes that you referred to in AR70668, does Vivado lauch under Cygwin without using the python script?

I am not very familiar with Cygqin, does it support the which command?

Best Regards
Aidan

 

------------------------------------------------------------------------------------------------------------------
Please mark the Answer as "Accept as solution" if this answered your question
Give Kudos to a post which you think is helpful and may help other users
------------------------------------------------------------------------------------------------------------------
0 Kudos
Highlighted
Adventurer
Adventurer
114 Views
Registered: ‎08-07-2018

Re: Problem when implementing Vivado 2018.3 project with python script in Cygwin.

vivado -mode batch -source implement.tcl
I get the following error shown in the attached image.
cygwin_error.PNG
0 Kudos
Moderator
Moderator
97 Views
Registered: ‎04-24-2013

Re: Problem when implementing Vivado 2018.3 project with python script in Cygwin.

Hi @cesar182 ,

If you run the settings.sh file in /Xilinx/Vivado/2018.3 and then type vivado, does Vivado launch?

This would be a first test to see if it is configured correctly under Cygwin

Best Reagrds
Aidan

 

------------------------------------------------------------------------------------------------------------------
Please mark the Answer as "Accept as solution" if this answered your question
Give Kudos to a post which you think is helpful and may help other users
------------------------------------------------------------------------------------------------------------------
0 Kudos