cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
6,686 Views
Registered: ‎12-17-2013

Select device in vivado2013.3

Jump to solution

Hello

I develop application with device XC7Z030-1FBG676I in Vivado design suite 2013.3

I can't find FPGA XC7Z030-1FBG676I in Select Device window in Vivado. I found only xc7z030fbg676-1 in temperature grade C (not I) and xq7z030rf676-1I  in temperature grade I. My application is very time critical about 0.1ns WNS. The right selection FPGA device is important for me because I want to have the timing analysis trustful and correct.

Can you please help me with this problem? See below.

Thank you and Regards.

Josefvivado.png

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
10,430 Views
Registered: ‎09-20-2012

Re: Select device in vivado2013.3

Jump to solution

Hi,

 

you may also check this link http://www.xilinx.com/support/answers/38221.htm

 

Thanks,

Deepika.

Thanks,
Deepika.
--------------------------------------------------------------------------------------------
Google your question before posting. If someone's post answers your question, mark the post as answer with "Accept as solution". If you see a particularly good and informative post, consider giving it Kudos (the star on the left)

View solution in original post

0 Kudos
4 Replies
Highlighted
Moderator
Moderator
6,670 Views
Registered: ‎06-05-2013

Re: Select device in vivado2013.3

Jump to solution

How you developed the application on this device?

 

As this device is available in C grade.

Thanks

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Highlighted
Scholar
Scholar
6,660 Views
Registered: ‎09-05-2011

Re: Select device in vivado2013.3

Jump to solution
A change request already exists on this issue. This is planned to be fixed for 8 series devices. For 7 series, select the required part using 'C' (Commercial) Temp grade.

Here is an informative article:
http://www.xilinx.com/support/answers/54561.htm
0 Kudos
Highlighted
Xilinx Employee
Xilinx Employee
10,431 Views
Registered: ‎09-20-2012

Re: Select device in vivado2013.3

Jump to solution

Hi,

 

you may also check this link http://www.xilinx.com/support/answers/38221.htm

 

Thanks,

Deepika.

Thanks,
Deepika.
--------------------------------------------------------------------------------------------
Google your question before posting. If someone's post answers your question, mark the post as answer with "Accept as solution". If you see a particularly good and informative post, consider giving it Kudos (the star on the left)

View solution in original post

0 Kudos
Highlighted
6,640 Views
Registered: ‎12-17-2013

Re: Select device in vivado2013.3

Jump to solution

Hi

Thank you very much for all.

Josef

0 Kudos